Intel MFSYS25 - AXXPSU 1000W Power Supply Module Скачать руководство пользователя страница 30

Страница: 30 / 164

Intel® Modular Server System MFSYS25 User Guide

4. Rotate the lever handle in toward the module bay until it is latched.

5. Connect one or more Ethernet switch ports to your network as is appropriate.

Removing an Ethernet Switch Module

1. Review the safety and ESD information at the beginning of this manual and in the

appendices.

2. Remove and label the connected Ethernet cables, as necessary.

3. Press the retention latch (see letter “A” in the following figure) to release the retention

lever. Rotate the lever out and away from the module bay (see letter “B”) and pull the
module straight out the back of the chassis (see letter “C”).

Figure 10. Removing an Ethernet Switch Module

AF002413

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы:

Похожие инструкции для MFSYS25 - AXXPSU 1000W Power Supply Module

Бренды по названию

Популярные бренды

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, Руководство пользователя

Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы:

Похожие инструкции для MFSYS25 - AXXPSU 1000W Power Supply Module

Бренды по названию

Популярные бренды