Intel MFSYS25 - AXXPSU 1000W Power Supply Module Скачать руководство пользователя страница 23

Страница: 23 / 164

Intel® Modular Server System MFSYS25 User Guide

Hardware Installations and
Upgrades

Before You Begin

Before working on your server system, review the safety and ESD information at the
beginning of this manual and in the appendices.

Tools and Supplies Needed

•

Phillips

(cross head) screwdriver (#1 bit and #2 bit)

•

Needle-nosed pliers

•

A ruler

•

Pen or pencil

•

Anti-static wrist strap and conductive foam pad (recommended)

Chassis References

All references to left, right, front, top, and bottom are based on the reader facing the front
of the chassis as it would be positioned for normal operation.

Installing the Intel

Modular Server System MFSYS25 in a

Rack

The Intel

Modular Server System MFSYS25 is designed for fixed mount rack

installation only; all service events will be performed from either the front or back of the
system.

Caution: When removing the system from its packaging, DO NOT lift the system by the power

supply or fan module handles.

Installation Guidelines

1. Review the safety and ESD information at the beginning of this manual and in the

appendices.

2. Two or more people are required to install the Intel

Modular Server System

MFSYS25 in a rack cabinet.

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы:

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, Руководство пользователя, Страница: 23 / 164

Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы: