Intel MFSYS25 - AXXPSU 1000W Power Supply Module Скачать руководство пользователя страница 29

Страница: 29 / 164

Intel® Modular Server System MFSYS25 User Guide

Installing and Removing an Ethernet Switch Module

The Intel

Modular Server System MFSYS25 ships with one Ethernet switch module pre-

installed; optionally, a second switch module may be installed in the second switch
module bay.

Installing an Ethernet Switch Module

1. Review the safety and ESD information at the beginning of this manual and in the

appendices.

2. Locate an available switch bay and remove any installed module or filler panel.

3. Release and rotate the module retention lever out and away from the switch module

(see letter “A” in the following figure). Slide the switch module into the selected
module bay (see letter “B”) until the bottom of the retention lever engages the bay.

Figure 9. Installing an Ethernet Switch Module

AF002437

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы:

Intel MFSYS25 - AXXPSU 1000W Power Supply Module, Руководство пользователя, Страница: 29 / 164

Результаты поиска

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module

Отзывы: