Intel MFSYS25 - AXXPSU 1000W Power Supply Module Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 164

background image

Intel® Modular Server System MFSYS25 User Guide

127

unplugged. Make sure the AC power cord(s) is/are unplugged before you open the
chassis, or add or remove any non hot-plug components.

Do not attempt to modify or use an AC power cord if it is not the exact type required. A
separate AC cord is required for each system power supply.

Some power supplies in Intel

®

servers use Neutral Pole Fusing. To avoid risk of shock use

caution when working with power supplies that use Neutral Pole Fusing.

The power supply in this product contains no user-serviceable parts. Do not open the
power supply. Hazardous voltage, current and energy levels are present inside the power
supply. Return to manufacturer for servicing.

When replacing a hot-plug power supply, unplug the power cord to the power supply
being replaced before removing it from the server.

To avoid risk of electric shock, turn off the server and disconnect the power cord,
telecommunications systems, networks, and modems attached to the server before opening
it.

Power Cord Warnings

If an AC power cord was not provided with your product, purchase one that is approved
for use in your country.

Caution: To avoid electrical shock or fire, check the power cord(s) that will be used with the

product as follows:

•

Do not attempt to modify or use the AC power cord(s) if they are not the exact type
required to fit into the grounded electrical outlets

•

The power cord(s) must meet the following criteria:

•

The power cord must have an electrical rating that is greater than that of the
electrical current rating marked on the product.

•

The power cord must have safety ground pin or contact that is suitable for the
electrical outlet.

•

The power supply cord(s) is/are the main disconnect device to AC power. The socket
outlet(s) must be near the equipment and readily accessible for disconnection.

•

The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided
with a suitable earth ground.

System Access Warnings

Caution: To avoid personal injury or property damage, the following safety instructions apply

whenever accessing the inside of the product:

•

Turn off all peripheral devices connected to this product.

•

Turn off the system by pressing the power button to off.

•

Disconnect the AC power by unplugging all AC power cords from the system or wall
outlet.

«
...
137
138
139
140
141
...
»

Содержание MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MFSYS25 - AXXPSU 1000W Power Supply Module

Бренд: Samsung Страницы: 7

BladeCenter QS20

Бренд: IBM Страницы: 92

BladeCenter JS20

Бренд: IBM Страницы: 218

HS21 - BladeCenter - 8853

Бренд: IBM Страницы: 80

8835 - Eserver 325 - 1 GB RAM

Бренд: IBM Страницы: 62

8835 - Eserver 325 - 1 GB RAM

Бренд: IBM Страницы: 2

8676 - Eserver xSeries 335

Бренд: IBM Страницы: 92

8670 - Eserver xSeries 345

Бренд: IBM Страницы: 60

8647 - Eserver xSeries 225

Бренд: IBM Страницы: 182

8480 - Eserver xSeries 205

Бренд: IBM Страницы: 64

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 136

Бренд: IBM Страницы: 480

Бренд: IBM Страницы: 68

@Server pSeries 630 6C4

Бренд: IBM Страницы: 180

eServer 380 xSeries

Бренд: IBM Страницы: 54

Бренд: 360 Systems Страницы: 117

Бренд: TYAN Страницы: 221

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды