Intel Intel E7230 MCH Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 38

background image

2

Intel

®

E7230 Chipset Memory Controller Hub (MCH)

Thermal/Mechanical Design Guide

Notice:

This document contains information on products in the design phase of development. The information here is subject to change without

notice. Do not finalize a design with this information. Contact your local Intel sales office or your distributor to obtain the latest specification before
placing your product order.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL

®

PRODUCTS. EXCEPT AS PROVIDED IN INTEL'S TERMS

AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS
OR IMPLIED WARRANTY RELATING TO SALE AND/OR USEOF INTEL PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER
INTELLECTUAL PROPERTY RIGHT.

Intel may make changes to specifications, product descriptions, and plans at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

The Intel

®

E7230 chipset may contain design defects or errors known as errata, which may cause the product to deviate from published specifications.

Current characterized errata are available upon request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-
548-4725, or by visiting Intel's website at http://www.intel.com.

Intel, Intel 6700PXH 64=-bit PCI Hub, Intel 6702PXH 64-bit PCI Hub, and the Intel logo are trademarks or registered trademarks of Intel Corporation
or its subsidiaries in the United States and other countries.

Copyright © 2005, Intel Corporation. All rights reserved.

* Other brands and names may be claimed as the property of others.

«
1
2
3
4
...
»

Содержание Intel E7230 MCH







































Отзывы:

Нет отзывов

Похожие инструкции для Intel E7230 MCH

Бренд: KELCO Страницы: 36

Бренд: T-Verter Страницы: 121

Бренд: Happy Страницы: 10

Бренд: 7bit Страницы: 2

Бренд: Jafar Страницы: 15

Бренд: 3M Страницы: 34

Бренд: Baby Trend Страницы: 8

Бренд: Baby Trend Страницы: 19

Бренд: Baby Trend Страницы: 5

Бренд: Baby Trend Страницы: 4

Бренд: BADODOSECURITY Страницы: 8

Бренд: Samson Страницы: 56

Бренд: Hach Страницы: 128

Бренд: Yamato Страницы: 33

Бренд: Sanhua Страницы: 3

Бренд: Dantherm Страницы: 20

Бренд: µ-Dimension Страницы: 48

Бренд: µ-Dimension Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды