Development Board Physical Reference
Development Kit User’s Manual
53
4.3
Configuration Settings
4.3.1
Configuration Jumpers/Switches
Caution:
Do not move jumpers with the power on. Always turn off the power and unplug the
power cord from the computer before changing jumper settings. Else, it may damage the
board.
Note:
Some jumpers may fall off during shipment. Jumpers that are only attached to one
pin (noted as 1-x) are more prone to becoming detached. Replacing detached 1-x
jumpers is not required for proper board operation.
Figure 7
shows the location of the configuration jumpers and switches.
2
Table 17
summarizes the jumpers and switches and gives their default and optional settings.
The board is shipped with the jumpers and switches shunted in the default locations.
Figure 7. Location of the Configuration Jumpers/Switches
