I
NTEL
® X
EON
® P
ROCESSOR
7500 S
ERIES
U
NCORE
P
ROGRAMMING
G
UIDE
UNCORE PERFORMANCE MONITORING
2-122
THERM_TRP_UP
• Title: DIMM ‘Up’ Thermal Trip Points Crossed
• Category: Thermal Throttle
• Event Code: 0x04, Max. Inc/Cyc: 1,
• Definition: Counts when a specified thermal trip point is crossed in the “up” direction.
TRANS_CMDS
• Title: Translated Commands
• Category: Dispatch Queue
• Event Code: 0x12, Max. Inc/Cyc: 1,
• Definition: Counts read/write commands entered into the Dispatch Queue.
DIMM{n}.GT_LO
0x1,0x0
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "down"
direction for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
DIMM{n}.LT_LO
0x0,0x0
Advance the counter when the below low temp, but below
mid temp thermal trip point is crossed in the "down"
direction for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Extension
THR Bits
[8:7],[3]
Description
ALL.GT_MID_RISE
0x3,0x1
Advance the counter when the above mid temp thermal
trip point (rising) is crossed in the "up" direction for any
DIMM
ALL.GT_MID_FALL
0x2,0x1
Advance the counter when the above mid temp thermal
trip point (falling) is crossed in the "up" direction for any
DIMM
ALL.GT_LO
0x1,0x1
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for any DIMM.
ALL.LT_LO
0x0,0x1
Advance the counter when the below low temp thermal trip
point is crossed in the "up" direction for any DIMM
DIMM{n}.GT_MID_RISE
0x3,0x0
Advance the counter when the above mid temp thermal
trip point (rising) is crossed in the "up" direction for DIMM
#?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
DIMM{n}.GT_MID_fALL
0x2,0x0
Advance the counter when the above mid temp thermal
trip point (falling) is crossed in the "up" direction for DIMM
#?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
DIMM{n}.GT_LO
0x1,0x0
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
DIMM{n}.LT_LO
0x0,0x0
Advance the counter when the below low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Extension
THR Bits
[10:9],[3]
Description