I
NTEL
® X
EON
® P
ROCESSOR
7500 S
ERIES
U
NCORE
P
ROGRAMMING
G
UIDE
UNCORE PERFORMANCE MONITORING
2-114
DSP_FILL
• Title: Dispatch Queue Events
• Category: DSP Events
• Event Code: 0x00, Max. Inc/Cyc: 1,
• Definition: Measure a dispatch queue event.
FVC_EV0
• Title: FVC Event 0
• Category: FVC Events
• Event Code: 0x0d, Max. Inc/Cyc: 1,
• Definition: Measure an FVC related event.
• NOTE: It is possible to program the FVC register such that up to 4 events from the FVC can be inde-
pendently monitored. However, the bcmd_match and resp_match subevents depend on the setting of
additional bits in the FVC register (11:9 and 8:5 respectively). Therefore, only ONE
CAS_WR_CLS.WRPRIO
[12:8]0x6
&& [0]0x1
[9:7]0x2
Count CAS Write (precharge, closed page mode) DRAM
commands during ‘static write priority’ scheduling
mode.
CAS_WR_CLS.ADAPTIVE
[12:8]0x6
&& [0]0x1
[9:7]0x3
Count CAS Write (precharge, closed page mode) DRAM
commands during ‘adaptive’ scheduling mode.
MRS
[12:8]0x7
Count Mode register set DRAM commands
RFR
[12:8]0x9
Count Refresh DRAM commands.
ENSR
[12:8]0xA
Count Enter Self-Refresh DRAM commands.
EXSR
[12:8]0xB
Count Exit Self-Refresh DRAM commands.
NOP
[12:8]0xC
Count NOP DRAM commands.
TRKL
[12:8]0x10
Count Write Trickle DRAM commands.
PRE
[12:8]0x11
Count PRE DRAM commands.
SYNC
[12:8]0x12
Count SYNC DRAM commands.
CKE_HI
[12:8]0x14
Count CKE High DRAM commands.
CKE_LO
[12:8]0x15
Count CKE Low DRAM commands.
SOFT_RST
[12:8]0x17
Count Soft Reset DRAM commands.
WR_CFG
[12:8]0x1C
Count Write Configuration Register DRAM commands.
RD_CFG
[12:8]0x1D
Count Read Configuration Register DRAM commands.
ZQCAL
[12:8]0x1E
Count ZQ Calibration DRAM commands.
ALL.TRDOFF
[0]0x0
[9:7]0x0
Count all DRAM commands during "static trade off"
scheduling mode
ALL.RDPRIO
[0]0x0
[9:7]0x1
Count all DRAM commands during "static read priority"
scheduling mode
ALL.WRPRIO
[0]0x0
[9:7]0x2
Count all DRAM commands during "static write
priority" scheduling mode
ALL.ADAPT
[0]0x0
[9:7]0x3
Count all DRAM commands during "adaptive"
scheduling mode
Table 2-88. Unit Masks for DSP_FILL
Extension
DSP[10:7]
Description
RDQ_FULL
0x1
Cycles dispatch read queue is full
WRQ_FULL
0x2
Cycles dispatch write queue is full
RDQ_EMPTY
0x4
Cycles dispatch read queue is empty
WRQ_EMPTY
0x8
Cycles dispatch write queue is empty
Extension
PLD Dep
Bits
ISS Dep
Bits
Description