Intel Atom C2000, Руководство по началу работы

Страница: 81 / 86

BIOS Update Using an SPI Programmer
Getting Started Guide 81
Figure 29. DediProg SF600 Programmer and Adapter
B.2 Software Required
Download and install the SF600 installation software on the Windows* PC (this example uses
SF6.0.4.04.zip).
http://www.dediprog.com/download/
B.3 Setup
Plug the programming cable into the SO connection adapter, making sure to align the
striped edge of the cable with pin 1 of the connector.
Plug the adapter with cable into the SF600 programmer, aligning the bump-out on the
adapter connector with the slot in the SF600 programmer ICP connector.
With power disconnected from the Mohon Peak CRB, plug the free end of the SF600
programming cable into the SPI_EMUL header on the Mohon Peak CRB. Make sure to align
the striped edge of the cable with pin 1 of the header.
To program the BIOS1 Flash component, place the jumper on JP22 to connect pins 2-3 and
the jumper on JP4 to connect pins 1-2 (see
Table 8 ).
To program the BIOS2 Flash component, place the jumper on JP22 to connect pins 2-3 and
the jumper on JP4 to connect pins 2-3 (see
Table 8 ).