Menu Operation
- 19 -
ON :
The frequency showing arrowhead is main frequency, the frequency without showing arrowhead is
secondary frequency. The main frequency can be used for transmitting and receiving. When the
secondary frequency receives an incoming signal, the arrowhead will move to secondary frequency, the
secondary frequency can be used for transmitting and receiving and it becomes the main frequency.
AUTO :
The frequency showing arrowhead is main frequency, the frequency without showing arrowhead
is secondary frequency. The main frequency can be used for transmitting and receiving. When the
secondary frequency receives an incoming signal, the arrowhead will move to secondary frequency, the
secondary frequency can be used for transmitting and receiving.
When no more signal is detected on secondary frequency, after 5 seconds the arrowhead will return to
main frequency and the secondary frequency can not be used for transmitting.
Press the MENU key (7) to confirm the operation then press the UP/DOWN keys (6) to select other
functions or press the FUN key (9) to return to standby status.
WARNING !
The Dual Watch options can be enabled in according to the REPEATER FUNCTION
settings. Please refer to REPEATER FUNCTION (MENU 33).
REP : Repeater Function (MENU 33)
In MENU mode, select the item 21 (N); the
REP
indication (W) will appear on the LCD display (5). Press
MENU key (7) to confirm it and press the UP/DOWN keys (6) to select the desired option (A<->B, A-->B
or A<--B).
"A" :
Upper line (W) Channel/Frequency
"B" :
Lower line (V) Channel/Frequency
A<-->B :
Radio can receive and transmit on both Channel/Frequency "A" and "B"
A-->B :
Radio can transmit on Channel/Frequency "A" and receive on Channel/Frequency "B" only
A<--B :
Radio can receive on Channel/Frequency "A" and transmit on Channel/Frequency "B" only
Press the MENU key (7) to confirm the operation then press the UP/DOWN keys (6) to select other
functions or press the FUN key (9) to return to standby status.
Reverse Frequency Function
Press the FUN key (9) and the # key to enable the Reverse Frequency function; the R icon (G) will appear
on the LCD display. The receiving and transmitting frequencies will be reversed on the used channel. This
function may operate only if the receiving and transmitting frequencies are different. Please refer to
OFFSET
and
RPTMOD
functions (MENU ITEMS 20 and 21) at page 16.
Repeat the same procedure to return to normal condition; the R icon (G) will disappear from the LCD display.
Tone Squelch Function (CTCSS) / (DCS)
Any channel may be associated to a programmed private protection CTCSS/DCS tone. A CTCSS/DCS
tone is a sub audible tone which allows to cut off and therefore not to listen to signals transmitted from
other users on the same operating channel.
When you receive a signal which has a tone different from the one which has been programmed on
your radio, you will not listen to this signal. For the same reason, your outgoing messages can only be
received by other radios which have the same tone as yours on that channel.
When a channel is associated to a CTCSS or DCS tone, the icon CTS (D) or DCS (E) will appear on
the LCD display (5). Please refer to MENU 17, 18 and 19 at page 15-16.
Note :
Even if the use of a CTCSS/DCS tone will protect you from receiving unwanted signals, the
privacy of your transmissions is not guaranteed.
Please refer to
MENU ITEMS 17, 18 and 19
at pages 15-16.
English
Содержание KT-900EE
Страница 47: ... 45 Notes ...
Страница 48: ......
