Intek KT-900EE, Инструкция по эксплуатации

Страница: 14 / 48

English
FUN + MENU Store the frequency on selected channel
FUN Press and Hold the FUN key for 2 Seconds to Unlock the Keypad.
FUN + LAMP FM Radio Mode / Transceiver Mode switch.
MENU + * Keypad lock
LAMP Press and Hold the LAMP key for 2 Seconds to transmit the calling tone.
MENU OPERATION
Menu Sequences
SCAN --> TOT --> VOX --> CAL --> ROG --> BEEP --> KYLOCK --> MEM --> LED --> POW -->
APO --> CTSCAN --> DCSCAN --> SQL --> SAVE --> MODE --> C --> R --> T --> OFFSET -->
RPDMODE --> STEP --> FMR --> SCNADD --> CHNAME --> 1750EN --> W/N --> ARS --> VOXDL -->
TOA --> BCL --> DW --> REP
Menu Operation Details
Press the MENU key (7) to enter the MENU mode. Press the UP/DOWN keys (6) to select the desired
menu item, indicated by the flashing numerical indication (N) (from 01 to 33) and press the MENU key
(7) to confirm; the selected function will be indicated by the arrowhead (R). Press the UP/DOWN keys
(6) to select the desired feature and press the MENU key (7) to confirm and return to MENU mode, or
press the FUN key (9) to confirm and return to Stand-by status.
Note : This radio has a Dual Channel/ Dual Frequency 2-line reading LCD. User can operate on two
separate VHF or UHF frequencies or channels (A and B). The up (A) and down (B) Channel/Frequency
indications (W / V) will display different options/settings that can be set using the menu. The indications
can be selected by pressing the * key (16).
SCAN : Scan Modes (MENU 01)
In MENU mode, select the function 01 (N); the SCAN indication (W) will appear on the LCD display (5).
Press the MENU key (7) to confirm and press the UP/DOWN keys (6) to select the modes CO, TO
or SE.
CO : It is carrier scan mode. Scan stops on a signal until it is no more detected.
TO : Whenever a signal is detected, the radio will suspend the scan function for 5 seconds, and then it
will continue to scan even if the signal is still present.
SE : It is carrier scan mode. If a signal is detected, radio stop scanning and exits the Scan Mode.
Press the MENU key (7) to confirm the operation then press the UP/DOWN keys (6) to select other
functions or press the FUN key (9) to return to standby status.
Press FUN key (9) and 0 key to start automatic Scan function. Press FUN key (9) to stop scanning.
TOT : Time Out Timer Setup (MENU 02)
In MENU mode, select the item 02 (N); the TOT indication (W) will appear on the LCD display (5). Press
MENU key (7) to confirm and press the UP/DOWN keys (6) to select the desired transmitting time from
30 to 240 seconds or select OFF to disable the TOT function. Press the MENU key (7) to confirm the
operation then press the UP/DOWN keys (6) to select other functions or press the FUN key (9) to return
to standby status. This feature sets the maximum transmit time before going back to receive
automatically. The TOT function avoid to transmit for an endless time, in order to prevent overheating or
damage to the transceiver. After a programmable time of 30-240 seconds of uninterrupted transmission,
the transceiver automatically stops the transmission emitting a warning tone .
Menu Operation
- 12 -