Intek KT-900EE, Инструкция по эксплуатации

Страница: 13 / 48

Getting Started - Menu Shortcut Keys
- 11 -
English
Frequency Mode
In FREQUENCY MODE, press the UP/DOWN keys (6) to select the desired frequancy, or use numeric
keys (8) to manually input the desired frequency number. (NOTE: The defaults frequency step is
12.5KHz. Refer to
STEP function at page 16 to select the desired frequency step.
Transmission / Receiving
In order to transmit, press the PTT (11) key and speak with your normal voice, keeping the microphone
at about 4 cm from your mouth. The LED indicator (3) will light in red color. Release the PTT (11) key at
the end of transmission. When receiving a signal, the LED indicator (3) will light in green colour.
In VOX Mode, trasmission is automatically initiated by speaking into the microphone (10) and there is
no need to push the PTT key (11).
Channel Saving
In FREQUENCY MODE, to store the desired frequency in a memory channel, please proceed as follow :
1.
Press FUN key (9); the FUNC indication (W) appears on the LCD display (5).
2. Press MENU key (7); the SAVE indication (W) appears on the LCD display (5).
3. Press UP/DOWN keys (6) to select the desired channel number (V), from 1 to 128.
4. Press MENU key (7) to confirm and store channel.
Channel Deletion
To delete a channel, radio must be in CHANNEL-FREQUENCY MODE (CHFREQ).
1.
Select the channel to remove and then turn OFF the radio.
2. Hold on the * key while turn on the radio. The LCD will show DEL ? (W) and the selected channel
number (N).
3. Press the MENU key (7) to confirm. After operation, the transceiver will return to CHANNEL-
FREQUENCY MODE.
MENU SHORTCUT KEYS
Press the FUN (9) key, then press the numeric key to enter appropriate items. This shortcut function is
same as the items of menu, but they more easy to operate the Two Way Radio.
FUN + 1 High / Low Power selection
FUN + 2 Squelch Level Setup
FUN + 3 Operating Mode : Channel Mode (CH) / Channel-Frequency Mode (CHFREQ) /
Frequency Mode (FREQ) / Name Mode (NAME)
FUN + 4 Single Channel/Frequency / Dual Channel/Frequency Switch
FUN + 5 VOX Function Setup
FUN + 6 Time-out Timer (TOT)
FUN + 7 CTCSS / DCS function in Receiving & Transmitting modes
FUN + 8 CTCSS / DCS in Receiving mode
FUN + 9 CTCSS / DCS in Transmitting mode
FUN + 0 Scan function (Please refer to SCAN Function at page 12)
FUN + # Reverse Frequency Function
(Please refer to
REVERSE FREQUENCY Function at page 19)
FUN + * Emergency Channel Recall
(Please refer to
MEM-CH function at page 14)