11 | Integral Audio | Installation Instructions
Continued on next page...
49. H
ow
to
r
eMoVe
tHe
e
ncloSure
To remove the enclosure, simply disconnect the
speaker wire, unscrew the Rosette Thumbscrews,
and remove.
WARNING: Do not allow the Banana Plug connec-
tors to short (touch each other) while the system is
energized.
52. r
ecoMMended
I
nItIal
a
MplIfIer
S
ettIngS
Gain: 20% (see ARC manual)
Output: LOW (low-pass crossover)
Crossover: 80 Hz
Bass Boost: 0
Input: RCA In (button should be OUT)
Factory Radio Bass Level: -2
50. r
econnect
tHe
b
attery
& I
nStall
f
uSe
Reconnect the Battery Negative Terminal and Install
one of the 30 amp AGU fuses in the fuse block. A
spare fuse is included.
G. TESTING & RECOMMENDED INITIAL SETTINGS
51. t
eSt
for
c
orrect
o
peratIon
Turn on the system and check for correct operation.
Once you have confirmed that everything is operating
correctly, reinstall all panels and trim removed during
the installation. Use the provided electrical tape and
cable ties to wrap and secure wiring bundles and har-
nesses as necessary.
TEST!