38
Getting Started
—Continued
If you’ve connected the NVS-7.7 to your AV receiver with an optical or coaxial digital audio connec-
tion, to enjoy Dolby Digital and DTS, you must change the following settings for Media Center and
PowerDVD.
■
Media Center Setting
■
PowerDVD Setting
Notes:
• When the
Use SPDIF
option is set to On, or the Enable S/PDIF check box is selected, Dolby
Digital and DTS audio is output by the digital audio outputs, but not the analog audio outputs.
• When set to off, Dolby Digital and DTS signals are output as PCM.
• If your TV or audio system doesn’t support Dolby Digital and DTS, turn off both of these
options.
Step 13: Enable 5.1-channel Digital Audio Output
1
On the Media Center Start menu,
click Settings.
The settings menu appears.
2
Click DVD.
The DVD settings menu appears.
3
Click Audio.
The Audio settings menu appears.
4
Select the Use SPDIF option.
1
On the Media Center Start menu,
click DVD Audio.
PowerDVD starts.
2
Click Configuration.
The settings menu appears.
3
Click the Audio tab.
The Audio settings menu appears.
4
Select the Enable S/PDIF option.
Note:
When playing a DTS CD, make sure the
Enable S/PDIF
option is deselected,
otherwise noise may be produced.
NVS-7.7 Hard.book Page 38 Monday, April 17, 2006 9:56 AM
