46
Preference
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4.Preference
1.Volume Setup
2.OSD Setup
3.OSD Tweak
Quit:|OSD|
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.Zone2 OSD Setup
6.About
Select: Exit:|EXIT|
Enter:|ENTER| Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4.Preference
1.Volume Setup
2.OSD Setup
3.OSD Tweak
Quit:|OSD|
1
2
3
4
5
6
7
8
9
0
1
2
123456789012345678901234
4-1.Volume Setup
a.Volume Display
:Absolute
b.Muting Level
:-50dB
c.Maximum Volume
:Off
d.Power On Volume
:Last
Quit:|OSD|
4. Preference menu
This menu provides settings for you to customize certain
functions of the DTR-9.1 as you wish.
4-1. Volume Setup sub-menu
This sub-menu allows you to make various settings
concerning the volume control of the DTR-9.1.
a. Volume Display
You can choose from two ways of displaying the vol-
ume setting on screen.
Absolute:
This displays the volume with a minimum
of min (0) for no sound and a maximum of max
(100). As a reference, the volume setting of Ref (82)
is used as the 0 -decibel for the relative display
method.
Relative:
This displays the volume as a decibel value
on a scale with a designated reference point that is
displayed as 0, which equals the volume setting of
82 for the absolute display method. With this display
method, the minimum value is - , the next highest is
-81, and the maximum value is +18.
b. Muting Level
This sets the attenuation level during playback when
the Muting button is pressed on the remote controller.
This can be set between - , -50 and -10 decibels in 10-
decibel increments.
c. Maximum Volume
This sets a maximum limit for the master volume to re-
duce the chance of any components becoming dam-
aged from accidental increases to the volume. For the
absolute volume display method, this can be set be-
tween 50 and 90. For the relative volume display
method, this can be set between -32 and +17 decibels.
d. Power On Volume
This sets a designated volume setting for the DTR-9.1 to
be set every time that the power is turned on. This pre-
vents the DTR-9.1 from being turned on while it is set to
an extremely high volume and suddenly output very
loud sounds. For the absolute volume display method,
this can be set between 0 and 99. For the relative vol-
ume display method, this can be set between - and
+18 decibels. If you do not mind having the DTR-9.1
turned on with its current volume setting, set this to “Last
Valid.”
