112
≫
≫
≫
≫
≫
≫
Setting Item
Default Value
Setting Details
Subwoofer
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "160 Hz" with the cursors
/
, adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
•
This cannot be selected if "Configuration" -
"Subwoofer" is set to "No".
•
Depending on the input source or listening mode setting, the desired effect may not be
achieved.
7. Speaker Virtualizer
The Speaker Virtualizer function can be switched between On and Off.
Setting Item
Default Value
Setting Details
Speaker
Virtualizer
On
"On": The listening mode with virtual speaker effect
such as T-D can be selected.
"Off": The listening mode with virtual speaker effect
such as T-D cannot be selected.
3. Audio Adjust
1. Multiplex/Mono
Change the settings of multiplex audio playback.
Setting Item
Default Value
Setting Details
Multiplex Input
Channel
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual
broadcasts, etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels are output at
the same time.
•
For multiplex audio broadcasts, pressing the
button on the remote controller will display "1+1"
on the main unit’s display.
Mono Input
Channel
Left + Right
Set the input channel to play 2-ch digital sources
such as Dolby Digital, or 2-ch analog/PCM sources
in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left + Right": Left and right channels
2. Dolby
Change the setting of when Dolby signals are input.
Setting Item
Default Value
Setting Details
Loudness
Management
On
When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume of
dialog at a certain level. Note that when this setting
is Off, the Late Night function that allows you to
enjoy surround at low volumes is fixed to off when
playing Dolby Digital Plus/Dolby TrueHD.
"On": When this function is used
"Off": When this function is not used
