7
≫
≫
≫
≫
≫
≫
Firmware Update Procedure
The update may take approx. 20 minutes to complete via network or via USB
port. Existing settings are guaranteed in either updating method.
When this unit is connected to the network, notifications of firmware updates may
be displayed. To update the firmware, select "Update Now" with the cursors on
the remote controller, and press the Enter button. The unit automatically Enters
standby mode after "Completed!" is displayed, and the update is completed.
Disclaimer
: The program and accompanying online documentation are furnished
to you for use at your own risk.
Our company will not be liable and you will have no remedy for damages for
any claim of any kind whatsoever concerning your use of the program or the
accompanying online documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will our company be liable to you or any third party for any special,
indirect, incidental, or consequential damages of any kind, including, but not
limited to, compensation, reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other reason whatsoever.
Updating the Firmware via Network
•
While updating the firmware, do not do the following:
–
Disconnecting and reconnecting cables, USB storage device, speaker
setup microphone or headphones, or performing operations on the unit
such as turning the power off
– Accessing this unit from a PC or smartphone using their applications
•
Check that the unit is turned on, and the connection to the Internet is secured.
•
Turn off the controller components (PC etc.) connected to the network.
•
Stop any playing Internet radio, USB storage device, or server content.
•
If the multi-zone function is active, turn it off.
•
If "HDMI CEC" is set to "On", set it to "Off".
– Press
. Next, select "6. Hardware" - "HDMI" and press Enter, then select
"HDMI CEC" and select "Off".
*
The descriptions may differ from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Press .
The Setup menu is displayed on the TV screen.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Listening Mode Preset
6. Hardware
7. Multi Zone
8. Miscellaneous
1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
2.
Select "8. Miscellaneous" - "Firmware Update" - "Update via NET" with the
cursors in order, then press Enter.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Listening Mode Preset
6. Hardware
7. Multi Zone
8. Miscellaneous
1. Tuner
2. Remote ID
3. Firmware Update
4. Initial Setup
5. Lock
6. Factory Reset
•
If "Firmware Update" is grayed out and cannot be selected, wait for a while
until it starts up.
•
If there is no updatable firmware, "Update via NET" cannot be selected.
3.
Press Enter with "Update" selected, and start update.
•
During the update, the TV screen may go black depending on the program
to be updated. In such a case, check the progress on the display of the
unit. The TV screen will remain black until the update is completed and the
power is turned on again.
•
When "Completed!" is displayed, the update is complete.
