137
≫
≫
≫
≫
≫
≫
❏
Resetting the unit (this resets the unit settings to the default)
If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem.
If the unit is reset, your settings are restored to the default values. Be sure to note down your setting contents before performing the following operations.
1.
While pressing and holding CBL/SAT of the input selector on the main unit with the unit turned on, press the
On/Standby button.
2.
"Clear" is displayed on the display, and the unit returns to the standby state. Do not remove the power cord until "Clear" disappears from the display.
To reset the remote controller, while pressing and holding Mode, press Clear at least 3 seconds.
2
1
