INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | GAGC06_E_0516 | USA 200303 | Page 21 of 41
DGC6 – UserManual
4.7.3 MM.DD.YY Number
The MM.DD.YY no. can be entered individually in the next menu.
Symbol
Description
Default
Function
0853....
Phone No.
Input of the individual MM.DD.YY no.
4.7.4 System Time, System Date
Input and correction of time and date. Selection of time and date format
Symbol
Description
Default
Function
US
Time format
US
US = Display of time and date in US format
EU = Display of time and date in EU format
hh.mm.ss
Time
hh.mm.ss pm
hh.mm.ss pm = Input of the correct time (US format)
hh.mm.ss = Input of the correct time (EU format)
MM.DD.YY Date
MM.DD.YY
MM.DD.YY = Input of the correct date (US format)
TT.MM.JJ = Input of the correct date (EU format)
4.7.5 Error Time Delay
Symbol
Description
Default
Function
s
Delay
120s
Definition of a delay time when a communication error is
shown on the display. (A delay on the fault output is not
allowed, therefore not used.)
4.7.6 X Bus Slave Address
(only existing, if X Bus function is available)
Symbol
Description
Default
Function
Address
Slave address at the
X Bus interface
1
Input of the slave address at the X bus. In addition to
the address, the available option appears. Currently
only Modbus available (pay attention to the additional
documentation of the protocol)
