MoRoS LAN PRO 2.0
Functions
61
12.6
Server Services
12.6.1
Setting up DNS Forwarding
You may use the MoRoS LAN PRO 2.0 as DNS relay server. When the MoRoS LAN PRO 2.0
is configured as DNS server at the locally connected network devices, the MoRoS LAN
PRO 2.0 will either forward the DNS queries to the previously configured DNS servers in
the Internet, or will use the IP addresses sent during the PPP connection setup as DNS
server.
Configuration with the web interface
DNS servers can be transferred to the MoRoS LAN PRO 2.0 during PPP connec-
tion establishment. For the MoRoS LAN PRO 2.0 to be able to forward the DNS
queries to
defined name servers
, enter the addresses of the according name
servers in the entry fields "First DNS server address" and "Second DNS server
address".
Save your settings
by clicking "OK".
12.6.2
Setting up the Dynamic DNS Update
The MoRoS LAN PRO 2.0 can forward the IP address, which it was allocated during the
dial-in into the Internet, to a DynDNS provider, so it can be reached from the Internet
with a domain name. This means that the network behind the MoRoS LAN PRO 2.0 can
always be reached with the same domain name from the Internet, also for dynamically
allocated IP addresses (if the allocated IP address for incoming connections is not pro-
tected). The MoRoS LAN PRO 2.0 will update the IP address connected to the domain
name at the DynDNS provider during each dialup. For this function, you will need an ac-
count with a DynDNS provider.
A public IP address must also be provided from the provider for packet-
based wireless connections (GPRS/EDGE/UMTS/HSDPA). Otherwise, the de-
vice cannot be accessed despite this service.
Configuration with the web interface
In order to
configure the dynamic DNS update
, check in the menu "Server ser-
vices" on the page "Dyn. DNS update" the checkbox "Activate dynamic DNS
update".
Select a
DynDNS provider
from the drop-down menu "DynDNS provider".
In order to
define an own DynDNS server
, select in the drop-down menu
"DynDNS provider" the entry "Userdefined DynDNS" and enter a DynDNS ser-
ver in the entry field "Userdefined DynDNS server".
Enter the
domain name to be updated
into the entry field "Domain name".
Enter the
user name and password
of your DynDNS account into the entry
fields "User name" and "Password".
Save your settings
by clicking "OK".
