MoRoS LAN PRO 2.0
Functions
33
12.2
LAN (ext)
12.2.1
Configuring the Interface to the External Network (LAN/ WAN)
The MoRoS LAN PRO 2.0 uses its router function to switch the data traffic between two IP
networks, an "internal" and an "external". The LAN ext interface of the MoRoS LAN PRO
2.0 serves for connecting the MoRoS LAN PRO 2.0 to the external network. This external
network can be another LAN, which can be accessed via an Ethernet cable. Then, you ha-
ve to configure an IP address for the LAN ext interface of the MoRoS LAN PRO 2.0. This IP
address must be in the address range of the external LAN, into which the MoRoS LAN
PRO 2.0 shall route. However, the external network can also be a WAN, which is con-
nected via an DSL connection. In this case, you must configure the interface for PPPoE
operation, that the MoRoS LAN PRO 2.0 can communicate with the WAN via an DSL mo-
dem.
Configuration with the web interface
In order to connect the MoRoS LAN PRO 2.0
with a LAN
, select in the "LAN
(ext)" menu on the "LAN (ext)" page the radio button "Set static IP address".
Then, enter into the entry fields "IP address" and "Netmask address" an IP ad-
dress as well as an network mask. The IP address must be an address from the
external LAN, to which you connect the MoRoS LAN PRO 2.0.
In order to connect the MoRoS LAN PRO 2.0
via DSL to a WAN
, configure in the
"LAN (ext)" menu on the "DSL" page the DSL connection first. Then, select in
the "LAN (ext)" menu on the "LAN (ext)" page the radio button "Activate DSL
connection".
In order to
enable the DHCP client
of the MoRoS LAN PRO 2.0, select in the
"LAN (ext)" menu on the "LAN (ext)" page the radio button "Activate DHCP cli-
ent".
In order to operate the MoRoS LAN PRO 2.0
as bridge
, select in the "LAN (ext)"
menu on the "LAN (ext)" page the radio button "Bridge, LAN (ext) behaves like
another switch port".
Save your settings
by clicking "OK".
