Functions
MoRoS LAN PRO 2.0
60
12.5.3
Configuring the LED Display of the Switch Ports
You can determine how the events at the network and the states of the switch ports are
displayed at the switch port status LEDs. We recommend not to change the basic settings
and to change the displays only temporarily for diagnosis purposes.
Configuration with the web interface
Select for the
respective network event or the state of the port the colour of
the LED display
of the switch port status LED in the menu "Switch" on the pa-
ge "LED configuration" via the radio buttons.
Save your settings
by clicking "OK".
12.5.4
Configuring Port Mirroring
With port mirroring, you can copy the data traffic of a switch port to a definable, other
switch port, called the sniffer port. This enables you to read the network traffic for analy-
sis purposes. The transmitting and receiving packets (TX/RX) of certain ports can be mir-
rored separately to a sniffer port, where the network traffic can be read.
Configuration with the web interface
To use a port as sniffer port, select the according port in the menu "Switch" on
the page "Port mirroring" in the drop-down menu "Sniffer port".
Select in the drop-down menu "TX mirroring to sniffer port" the port,
whose
TX line data you want to copy to the sniffer port
.
Select in the drop-down menu "RX mirroring to sniffer port" the port,
whose
RX line data you want to copy to the sniffer port
.
Save your settings
by clicking "OK".
