MoRoS LAN PRO 2.0
Functions
35
This function initiates individual events, regardless whether other times have already
been defined for the connection termination. Example: If you already configure a daily
connection termination at 14:00 and a daily connection establishment at 16:00, other
settings and events can also initiate a connection establishment within this period, e.g. a
packet, that complies with the dialling filter. The connection is also terminated, if the
configured "Idle time" has expired, for example.
Configuration with the web interface
In order to
establish a daily connection at a certain time
, check in the menu
"LAN (ext)" on the page "DSL" the checkbox "Connect automatically once a day
at" and enter a time for the connection setup into the entry fields for hours
and minutes.
In order to
terminate a daily connection at a certain time
, check the checkbox
"Disconnect automatically once a day at" and enter a time for the disconnec-
tion into the entry fields for hours and minutes.
Save your settings
by clicking "OK".
12.2.4
Configuring Leased Line Operation
You can configure the MoRoS LAN PRO 2.0 to permanently maintain a DSL connection. In
this operating mode, the MoRoS LAN PRO 2.0 will immediately establish the connection
after system start. The MoRoS LAN PRO 2.0 checks the connection for its function peri-
odically. The connection check can be performed either via a DNS query of a host name
or via PING at a host.
Configuration with the web interface
In order to
configure a leased line
, check in the menu "LAN (ext)" on the page
"DSL" the checkbox "Connect immediately and hold connection".
If necessary, enter another time in minutes for the
connection check
into the
entry field "Interval for checking connection". The default setting is 5 minutes.
If a closed connection is determined after this time, the MoRoS LAN PRO 2.0
will attempt to re-establish the connection after one minute. If the attempt
fails, there will be another attempt after 5 minutes. The next attempt will
take place after 30 minutes; if this attempt fails as well, the MoRoS LAN PRO
2.0 will attempt to re-establish the connection every 60 minutes.
Select the
method for connection check
using the radio buttons behind "Type
to check the connection" and enter a host name or an "IP address". The two
methods have a different effect. A failed DNS request terminates a possibly
existing connection and re-establishes the connection. A failed ping will make
sure that the connection is re-initiated, if it was closed after the last data pa-
cket or ping. The existing connection is not terminated, if the ping is not re-
sponded to.
Save your settings
by clicking "OK".
