INSYS EDGE 5.0 Series, Руководство пользователя

Страница: 72 / 107

Functions INSYS GPRS/EDGE 5.0 serial
72
After the response, the firmware (file with the ending *.hex) is sent
as a text file.
After the file has been received, the device needs up to 60 seconds
to complete the upload. Afterwards, the (INSYS GPRS/EDGE 5.0 se-
rial will automatically perform a restart.)
Note
After an update, the settings are reset to the factory defaults.
The SIM card PIN (AT**PIN) and the standard command settings of
the GSM/GPRS engine are maintained, which means that if auto-
matic call acceptance (e.g. ATS0=2) is activated, the device can still
be accessed from outside to enable the re-configuration of the ex-
tended functions per CSD call via remote configuration.
6.10 Virtual COM Port
Applications, which up to now communicated with the end devices
via a modem connection or directly via a serial interface, will not
function directly with TCP connections.
A virtual COM port is required, which will process TCP connections
on one side and make a COM port to the operating system avail-
able on the other side. Click on the “Serial/VCom” tab.
INSYS MICROELECTRONICS GmbH offers a free virtual COM port for the
operating systems Windows XP/2000.
The virtual COM port provides the following functions:
6.10.1.1 Authentication for Outgoing TCP Connection:
Notification about a unique device ID via a UDP packet prior to the actual
TCP connection, or directly at the beginning of a TCP connection.
6.10.1.2 Information about New IP Address:
This setting will only apply to the operating mode TCP Listen. It is used to
communicate the just allocated IP address together with a unique device