INSYS EDGE 5.0 Series, Руководство пользователя

Страница: 50 / 107

Functions INSYS GPRS/EDGE 5.0 serial
50
Alternatively, the access control can be set using the terminal program:
Default:
For the operation within the GPRS network, an Access Point and
the GPRS access data must be selected.
Activate selective call acceptance
Enter allowed phone number 1
Enter allowed phone number 2
Enter allowed phone number 3
AT**CLIP=1
AT**CLIP1=<nr1>
AT**CLIP2=<nr2>
AT**CLIP3=<nr3>
Store possible connection destinations:

IP address and port

Domain name and port

GSM data connection (CSD)
Store the callback connection type (IP, domain
name, CSD) for the three phone numbers
AT**AUTOIP=<ip>
AT**AUTOPORTIP=<port>
AT**AUTOURL=<domain>
AT**AUTOPORTURL=<port>
AT**AUTOCSD=<phone
number>
AT**CALLBACK=
<n1>,<n2>,<n3>
Save settings
AT**SAVE
Perform RESET, accept all parameters
AT**RESET
For IP and domain name destinations it is also possible to enter a
substitute access, it is therefore possible to enter different destina-
tions of the same kind for the different numbers. Example: for
CLIP1 a callback to the IP address 1.2.3.4, and for CLIP2 a callback to
the IP address 5.6.7.8.