INSYS EDGE 5.0 Series, Руководство пользователя

Страница: 33 / 107

INSYS GPRS/EDGE 5.0 serial Connection
33
Alternatively, the settings for TCP Listen can be entered using the terminal pro-
gram.
Automatic Connection acceptance
ATS0=2
Save this setting
AT&W
Set the TCP data port
AT**TCPLISTENPORT=1234
Activate TCP Listen
AT**TCPLISTEN=1
Save settings
AT**SAVE
Perform RESET,
accept all parameters
AT**RESET
The successful dial-up into the GPRS/EDGE network is displayed after the startup
with the mPPP-IP SETUP; the INSYS INSYS GPRS/EDGE 5.0 serial can now
be reached via its IP address.
If the connection can not be established (network failure, etc.) or if the connection
is terminated, the INSYS GPRS/EDGE 5.0 serial will automatically start reconnect-
ing.
To limit the connection costs for failed connection setups (for each connection
setup data packets are created and billed), the delay time will increase for every
new repeated attempt.

20 seconds after restart or if the last connection setup was successful

80 seconds after the first failure

320 seconds after the second failure

1280 seconds after the third failure

1 hour for each additional failure