insys icom ETSM, Инструкция по установке и эксплуатации

Страница: 47 / 55

ETSM / ETSU Commissioning, Operation and Configuration
ETSM
47
10.6 Configuration via USB flash drive
10.6.1 Function
The used USB flash drive must only have one partition and be formatted with FAT.
The versions FAT12, FAT16 and FAT32 are supported.
New data from an USB flash drive are only applied automatically if it is able to au-
thenticate with a valid user name and password. Therefore, an authentication file
named "userpassword.pass" must be present on the USB flash drive.

An authentication file must be present on the USB flash drive for a
configuration using the USB flash drive.
The authentication file must be an ASCII-coded text file without formatting. The
first line must contain the user name and the second line the password.
The directory structure of the USB flash drive must look like that:
•
userpassword.pass
•
log
o
logfile1.log
o
logfile2.log
o
…
•
configuser
o
config.cfg
o
confignew.cfg
•
newpassword.pass
•
OSYS_TQPRODUCT_Rxx.bin
10.6.2 Performing the configuration
To change the configuration of the switch, a valid configuration file must be pre-
sent in the folder "configuser" of the USB flash drive. The configuration file must be
named "confignew.cfg". After plugging in the USB flash drive into the switch, the
device will load the new configuration file automatically and apply it after success-
ful authentication.