insys icom ETSM, Инструкция по установке и эксплуатации

Страница: 39 / 55

ETSM / ETSU Commissioning, Operation and Configuration
ETSM
39
10.4.5 Diagnosis services
The diagnosis services allows to perform an automated diagnosis via network.
SNMP and Modbus TCP are available for this. The services are configured under
Diagnosis in
Configuration > Diagnostics.

All services do not support authentication. Therefore, it is
recommended to use them only if required.
10.4.5.1 SNMP
The SNMP service allows to read device information via network.
The device supports SNMPv1 get and getnext requests. The change of settings us-
ing set messages is not supported.
The requests must be sent to the IP address of the device and the standard SNMP
port 161.
The read community is public.
The following MIB-II groups are available and can be requested using get and get-
next:
•
System Group (1.3.6.1.2.1.1)
•
Interfaces Group (1.3.6.1.2.1.2)
•
Address Translation Group (1.3.6.1.2.1.3)
•
IP Group (1.3.6.1.2.1.4)
•
ICMP Group (1.3.6.1.2.1.5)
•
TCP Group (1.3.6.1.2.1.6)
•
UDP Group (1.3.6.1.2.1.7)
•
SNMP Group (1.3.6.1.2.1.11)
The System Group outputs all data that is configured in the web interface under
Configuration > System
.