insys icom ETSM, Инструкция по установке и эксплуатации

Страница: 44 / 55

Commissioning, Operation and Configuration
ETSM ETSM / ETSU
44
10.5 System Access Settings
10.5.1 IP address
The configuration of the IP address is performed in the web interface under
Config-
uration > System. The IP address, the subnet mask and the gateway can be config-
ured there and transmitted to the device using the "submit" button. The default set-
tings are:
•
IP address: 192.168.0.2
•
Subnet mask: 255.255.255.0
•
Gateway: 192.168.0.1
Changes of these settings become active after a restart of the system first. The sys-
tem can be restarted using the "reboot" button.
10.5.2 Power supply
The power supply settings are in the web interface under
Configuration > System
.
It is possible to configure whether power is supplied via input V1 (1), input V2 (2) or
redundant via both inputs (1+2). Default setting is 1. In case no sufficient voltage is
present at the configured input (or at one of the inputs in case of setting 1+2), a
fault will be triggered.