Page 8 of 22 Rev: 9/30/2011 1:26 PM
4
th
press of Time / Sensor:
Selects which sensor to show in position 1
Up / Down cycles through 1-9 with none then
again
5
th
press of Time / Sensor:
Selects which sensor to show in position 2
Up / Down cycles through 1-16 with none
then again
6
th
press of Time / Sensor:
Selects which Humidity sensor to show
Up / Down cycles between 1 (no number)
and 2
Thermostat Program Button Operation
The Program button allows you to setup the various pre-programmed modes (Wake, Leave,
Return, and Sleep).
Go to the next Program step by:
o
Pressing Program again
o
Press the Set button
o
NOTE: Both accepts current setting
Exit Program setup by:
o
Time out (30 seconds)
o
Pressing any button other than Up / Down, Set, or Program
1
st
press of Program:
- Selects from available pre-program modes
- Up / Down cycles through Wake, Leave, Return, and Sleep
- NOTE: Energy is not a part of this option
- NOTE: Once a pre-programmed mode is selected, that item remains blinking throughout to indicate
what you are programming
- NOTE: Once a pre-programmed mode is selected, the current settings are displayed on the thermostat
