Page 14 of 22 Rev: 9/30/2011 1:26 PM
TempLinc Wireless Zone Thermostat will (Beep)-(Beep)
3) Test the link by pressing the Master button on the TempLinc Wireless Zone Thermostat
INSTEON Programming
Linking as a Responder
Linking to On
4) Set thermostat to desired state
5) Put controller in linking
6) Press & hold Thermostat Set button
Thermostat Set LED goes
GREEN
for xx seconds
Thermostat will (Beep)
7)
Linking complete with a (Beep)-(Beep) / LED off
Linking to Off
1) Set thermostat to desired state
2) Put controller in linking
3) Simultaneously Press & hold Thermostat Set button and Down arrow
Thermostat Set LED goes
GREEN
for xx seconds
Thermostat will (Beep)
TempLinc will (Beep)-(Beep) / LED off
Display while in Linking to On or Off
Linking as a Controller
TempLinc can be setup to control other INSTEON devices or trigger software events when there is a
change. The following TempLinc changes can be setup as a controller:
Group 1 - Cooling mode change (scene control)
