Page 4 of 22 Rev: 9/30/2011 1:26 PM
Thermostat Button Overview
1 Up/Down
adjust the temperature setpoint based on the mode you are currently in
2 Mode
allows the user to select the current operational mode of the HVAC system. It cycles between
Off, Auto, Cool and Heat
3 Energy
button is designed to be a very quick to use option that saves energy (and money). When
you press it, it will back off the set point by a specified value. The default value if 5 degrees from the
current setting. To change the default offset value away from 5 degrees, you must use HouseLinc.
4 Hold
over-rides a pre-programmed mode
5 Fan
cycles between Auto and Always On
6 Master
makes the device the master temperature controller
7
Time / Sensor
button allows you to set the date, time and select the sensors/humidity to display. It
cycles between day, time, format, and each sensor option.
8 Program
button allows you to setup the various pre-programmed modes (Wake, Leave, Return, and
Sleep).
9 Set
button is for INSTEON linking and unlinking as well as accepting the current programming step
and going to the next one in sequence. For INSTEON functions, it works like Set does for other
INSTEON devices.
2
1
4
5
6
7
8
9
3
