Page 10 of 22 Rev: 9/30/2011 1:26 PM
Thermostat Fan and Hold Button Operations
Fan button operations
The Fan button cycles between Auto and Always On.
On the display, it simply cycles the text Fan Always to show or not.
Hold button operations
The Hold button over-rides a pre-programmed mode until either:
o
The mode / temp is changed manually by user
Including on a remote thermostat / templinc
o
Hold is turned off
NOTE:
If the next pre-programmed time comes, it will be ignored unless one of the above items
occurs.
NOTE:
While hold is enabled, the pre-programmed time notations are not shown.
NOTE:
There are no blinking items when using this button.
