31
Remove the access panel (Refer to
).
1.
Disconnect the cable of the super-capacitor.
2.
Remove the air duct.
3.
Pull out the plug of M.2 clip. One side of the M.2 drive pops up.
4.
Figure 4-8 Pulling Out the Plug of M.2 Clip
Tilt to pull the M.2 drive out from the drive slot on the motherboard, and put it
5.
into an antistatic bag.
Figure 4-9 Removing the M.2 Drive
To install the M.2 drive:
Take the new M.2 drive out from the antistatic bag.
1.
Tilt the M.2 drive to insert it into the drive slot on the motherboard.
2.
Figure 4-10 Installing the M.2 Drive
Insert the plug into the M.2 clip base to secure the M.2 drive in place.
3.
