55
The drawings shown below are for illustration only. The location and orientation of
the cell may differ depending on the model you purchased.
Figure 5-1 Removing the Battery
Dispose of the battery as required by local ordinances or regulations.
8.
To install the battery:
Take the new battery out from the anti-static package.
1.
Place the new battery into the socket, being careful to observe the correct
2.
polarity. Snap the battery into place. Make sure the battery is secured by the
clip within the socket.
Install the air duct.
3.
Connect the cable of the super-capacitor.
4.
Install the access panel.
5.
