22
Locate the CMOS clear jumper on the motherboard.
3.
Move the jumper cap from the default pins 1-2 to pins 2-3.
4.
Plug in the power cable and power on the server, and then wait for 10 seconds
5.
for the CMOS to clear.
Power down the server, unplug the power cable, and then wait for 5 seconds
6.
again.
Move the jumper cap back to the default pins 1-2.
7.
Reconnect the power cable and power on the server.
8.
3.5
Layout
Figure 3-7 System Layout
#
Item
#
Item
1
Front Drive Bays
13
Plate Capacitor
2
Internal Drive Bays
14
Rear 3.5-inch Drive Bays
3
Fan Modules
15
Processor Heatsink Modules
(PHMs)
4
Air Duct
16
Rear 2.5-inch Drive Bays
5
Access Panel
17
Rear M.2 Modules
6
Rear 2.5-inch Drive Bays
18
Rear E1.S Modules
7
Right Riser Card Module
(8-Card Configuration)
19
DIMMs
8
Middle Riser Card Module
20
Motherboard
