59
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
1
–
Upright Post Assembly
NOTE:
Two pcs
Nylock Nuts (M10xp1.5)(115)
will be pre-attached on each side of the front
Main Frame (2) ; Total four pcs Nylock Nuts (115) will be pre-attached
g. Remove two pcs
Nylock Nuts (M10xp1.5)(115)
from the right side of the front
Main Frame
Assembly (2).
h. Attach the
Right Upright Post Assembly (8)
to the
Main Frame (2)
by securing with
2pcs
Lock Washers (M10)(75)
,
2pcs Bolts (M10x20mm)(102)
and
2pcs Nylon Nuts
(M10xp1.5)(115). NOTE:
For easy assembly on the following processes,
please do not
secure the above lock washers, bolts and nylon nuts until
Step. d of
STEP 2 (on the next
page).
i.
Gently run the
Rear Connection Wire (119)
and the
Rear Motor Connection Wire (122)
through the
Right Upright
Post Assembly (8). CAUTION: If there is any difficulty to run the above wires smoothly through the Upright
Post Assembly, for easy assembly, route the wire one by one; and be care not to pinch the wires.
j.
Identify the correct direction of the
Right Upright Sleeve (38)
and
Right Upright Decoration Cover (40)
, there is
“FR” engraved texts inside the
Right Upright Sleeve (38)
and
Right Upright Decoration Cover (40).
k. Gently slide the
Right Upright Sleeve (38)
and
Right Upright Decoration Cover (40)
onto the
Right Upright Post
Assembly (8).
l.
Repeat the above same procedures on the left side.
Содержание IN 2440
