Insportline IN 2440, Руководство пользователя

Страница: 57 / 104

57
“ H
ARDWARE
I
DENTIFICATION
C
HART ”
Unpack the box in a clear area. Follow the List of Hardware Kit below. This chart is provided to help identify the hardware
used in the assembly process. Place the washers, the end of bolts, or screws on the circles to check for the correct
diameter. Use the small scale to check the length of the bolts and screws. Do not dispose of the packing material until the
assembly process is completed
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw
Note:
Please review below to know the content of the hardware kit
Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it has been
pre-assembled
HARDWARE KIT Part No. and Description Q’TY
75 Lock Washer (M10) 4 pcs
88 Bolt(M5x15mm) 10 pcs
102 Bolt (M10x20mm) 4 pcs
105 Bolt (M10x65mm) 2 pcs
115 Nylon Nut (M10xp1.5) 2 pcs
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:
T-HAND SOCKET
WRENCH (17MM)
ALLEN WRENCH
(8MM)
SCREWDRIVER