Insportline IN 2206, Руководство пользователя

Страница: 78 / 82

S13 Cap (31) onto the M8x50 Bolt (26).
NOTE: 1/2” Bolt for left U-Shape Bracket (16L) and 1/2” Bolt for right U-Shape Bracket
(16R) are marked with “
L
” and “
R
”.
Attach the Left Foot Pedal (36) onto the Left Foot Bar (2L) with three M6x40 Bolts (29),
Ø6 Washers (28), and M6 Nylon Nuts (27).
Attach the Foot Bar Covers-A/B (33L, 33R) onto the Left Foot Bar (2L) with two ST4.2x25
Phillips Self Tapping Screws (66).
Repeat above step to attach the Right Handrail Arm (3R) onto the right horizontal axis of the
Front Post (5) and right U-Shape Bracket (23) to the right Crank (78).
4. Install the Right and Left Handrails.
Attach the Right/Left Handrails (4R, 4L) onto the Right/Left Handrail Arms (3R, 3L) with four
M6x35 Bolts (47), Ø6 Curve Washers (48), and M6 Cap Nuts (50).
5. Install the Left/Right Handrail Arm Covers-A/B.
Attach the Left Handrail Arm Cover-A (52L) and Left Handrail Arm Cover-B (53L) onto the
Left Handrail Arm (3L) with four ST2.9x12 Screws (55).
Attach the Right Handrail Arm Cover-A (52R) and Right Handrail Arm Cover-B (53R) onto
the Right Handrail Arm (3R) with four ST2.9x12 Screws (55).
6. Install the Computer.
Remove four M5x12 Bolts (57) from the back of the Computer (56).
Insert the Hand Pulse Sensor Spring Wires (62) from Right/Left Handrails (4R, 4L) into the
hole on the Front Post (5) and then pull them out from the top end of the Front Post (3).
Connect the Sensor Wire I (67) and Hand Pulse Sensor Spring Wires (62) to the wires that
come from the Computer (56) and then attach the Computer (56) onto the top end of the
Front Post (5) with four M5x12 Bolts (57) that were removed.