Inspired Flight IF1200, Руководство пользователя

Страница: 18 / 35

Ensuring the screws line up with the corresponding screw holes on the motor, place
each propeller on its motor. Make sure each propeller is fully seated, with the aluminum
quick-disconnect resting on the motor itself.
Tighten the propellers onto the motors, ensuring not to over-tighten. We recommend
using the provided green-handled screwdriver. Tighten each retained screw until it
stops, then snug it up with an additional ⅛ of a turn. ​
Note:​ ​Do not use a T-handled
driver, as the aluminum parts will strip more easily.
18