INRED FUTURE MTC 3.0, Руководство пользователя

Страница: 20 / 28

18
e) program P2-P6
Please set the time firstly before start it. The default time is 30 minutes, adjusting range is 10:00-
99:00mins. Then set the level of level1 or level2 by SPEED+/- or INC+/-.
f) The left dot matrix zone will display the graphic of incline and the right matrix zone will display the
graphic of speed if both incline and speed programs exist.
Both of the right and the left matrix zones will display the graphic of incline or speed if there’s only
incline or speed program.
User program P 7
a) Please press the USER PROG to enter user program before the treadmill stops work. Firstly please
set the time, and then set the speed.
b) There are six segments about the speed and incline setting program. The setting scope for every
segment is 1.0-16.0 km for speed and 0%-15% for incline. Please use SPEED+/- and INC+/- to set
the speed and incline, press ENTER key for the setting of the next segment.
c) Please set the time by SPEED+/- or INC+/- and press ENTER after you finish it. The time range is
10-99mins.
d) Press START key to start the machine after all settings are finished.
e) The machine will memorize the setting value and work according to the setting value of last time, if
there’s no new setting for it.
f) Press ENTER key for five seconds when the machine is stopped. Then the setting value can be re-
set, the time displays 30 mins, speed displays 2 km, and incline displays 2%.