INRED FUTURE MTC 3.0, Руководство пользователя

Страница: 19 / 28

17
GENERAL OPERATION
GENERAL START
Plug the power cord, turn on the switch, and insert the safety key to the position of safety lock, the
default program is P1.
Press the START key, the machine will start running after counting down 3-2-1.
PRE-PROGRAM
a) program selection
Press the program shortcut key, or INC+/- or SPEED+/- SPEED+/- to enter the interface of pro-
gram setting. You can choose from P1 to P7. There’s no difference about the level for P1 and P7. Yet
there are three levels for P2-P6 which are LEVEL1, LEVER 2 and LEVEL3. Please set the level by
SPEED+/- or INC+/-, the default level is LEVEL 1. The calories window shows the level before start,
and calories value after start. The window of distance shows P1-P7 before start, and distance value
after start. The default time for one cycle of every program is 30 minutes. Press START to start the
machine, then the program will begin to run automatically and show counting down.
b) Please press the START key to begin your training after you finish the setting. The value you set
will counting down, and the machine will stop working when the value decreases to zero.
c) dot matrix display zone
The graphic for total speed and incline value which is figured out according to the time setting will
be displayed. The every single program is composed of three parts that is WARM UP, NORMAL and
COOL DOWN.
The dot matrix zone always displays the graphic of the front six lines. The behind lines will be
darker than the front ones if the whole graphic is within six lines. It will display in full screen if the
whole graphic contains six lines. It’ll firstly display the front six lines if the whole graphic is more
than six lines, and display the latter one by one after the front six lines is over one by one.
d) program P1
Please set the time firstly before start it. The default time is 30 minutes, and adjusting range is
10:00-99.00mins.Then set the speed by SPEED+/-. The default speed is 1.0km, adjusting range is
1.0km-16.0km. Finally set the incline by INC+/-. The default incline is 0%, adjusting range is 0%-15%.