INRED FUTURE MTC 3.0, Руководство пользователя

Страница: 23 / 28

21
c. If the belt is still not centered, repeat the above steps until the running belt is on center.
After the belt is centered, increase the speed above 14kph and verify that it is running smooth-
ly. Repeat the above steps if it is necessary. If the above procedure is unsuccessful in resolving the
off-center, you may need to increase the belt tension.
• Turn clockwise to increase the running belt tension (drawing 1)
• Turn counter-clockwise to decrease the running belt tension (drawing 2)
• TREADMILL LUBRICATION
Lubricating under the tread belt will ensure superior performance and extend its life expectancy.
Lubrication is available from your place of purchase. Wipe the entire deck surface with a clean lint
free cloth to remove all dust and dirt.
HOW TO CHECK RUNNING BELT FOR PROPER LUBRICATION
Lift one side of the tread belt and feel the top surface of the running board
If the surface is slick to the touch, then no further lubrication is required
If the surface is dry to the touch, apply one packet of lubricant or 30 -40ml of lubricant.
HOW TO APPLY LUBRICANT
1. Lift one side of tread belt.
2. Pour 30 -40ml of the lubricant bottle under the center of the tread belt on the top surface of the
tread board
3. Walk on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running board. Any excess lubricant that comes out should be wiped
off. Lubricant in a spray can is available from your place of purchase.
IMPORTANT: USE ONLY 30-40ml OF LUBRICANT PER APPLICATION