5.1. RECEPTION OF THE MIXER
5. Installation
INOXPA cannot be held responsible for the damage sustained by the equipment during
transport or unpacking. Please visually check that the packagin is not damaged.
The following documentation is included with the mixer:
- shipping documents,
- installation, service and maintenance instructions manual,
- instructions and service manual of the motor
1
1) if the mixer has been supplied with a motor from INOXPA
Unpack the mixer and check that is not damaged. If the equipment is not in good condition and/or
any part is missing, the carrier should report accordingly as soon as possible.
5.2. IDENTIFICATION OF THE MIXER
Each mixer has a nameplate with the basic data required to identify the model:
C. TELERS, 60 - 17820 BANYOLES
GIRONA (SPAIN) . www.inoxpa.com
INOXPA S.A.U.
Type
Year
No
R
Serial number
01.214.32.0014
5.3. TRANSPORT AND STORAGE
The mixers are often too heavy to be stored manually.
Use an appropriate means of transport.
Only authorized personnel should transport the blender.
Do not work or walk under heavy loads.
Lift the mixer as indicated below:
- always use two support points placed as far apart as possible.
ATTENTION
If the mixer is supplied without drive or another element, the purchaser shall be respon-
sible for its assembly, installation, start-up and operation.
Installation
INOXPA S.A.U.
03.100.30.04EN · (0) 2021/05
8
