3.1. WARNING SYMBOLS
3. Safety
Safety hazard for people in general and/or for the equipment
ATTENTION
Important instruction to prevent damage to the equipment and/or its function
3.2. GENERAL SAFETY INSTRUCTIONS
Read the instruction manual carefully before installing and starting the blender. Contact
INOXPA in case of doubt.
3.2.1. During installation
Electric hazard
Technical Specifications of chapter 9
.
The installation and use of the mixer should always be in accordance with applicable
regulations in regard to health and safety.
NEVER start-up the mixer before connect it to the tank.
Take all the precautions for move and assembly the mixer.
Before starting up the mixer, check that it is properly anchored and its shaft is perfectly
aligned. Incorrect alignment and/or excessive stress during coupling can cause serious
mechanical problems in the mixer.
Check the others installation components like tanks, valves, pipes, etc.
The mixer cannot work without liquid. The standards mixers are not designed to work
during the fill or empty the tanks.
During the installation, all electric work should be carried out by specialised personnel.
Keep the motor and the switchboard under control, particularly in areas where there is a
risk of fire or explosion.
Safety
5
INOXPA S.A.U.
03.100.30.04EN · (0) 2021/05
