6. Start-up
Before starting the mixer, carefully read the instructions in chapter
Carefully read chapter
. INOXPA will not be liable for improper
use of the equipment.
- Check that the power supply matches the rating indicated on the motor plate.
- Check that the V-ring is not worn or damaged.
-
Check the liquid level in the tank. The mixers cannot be operated during the filling or emptying
of the tank. The mixing element has to be submerged to, at the very least, twice its diameter
and must have clearance, with respect to the bottom, of 2 to 3 times the diameter of the head.
- All the guards must be in place.
-
The performance of the emulsifier mixer depends on the viscosity of the working fluid. The
following loading process must be followed in order to use the mixer properly:
• put all of the low viscosity components into the container,
• start up the mixer,
• check that the impeller turn in the right direction. It must turn clockwise as viewed from the
drive side)
The mixer must never turn dry.
ATTENTION
03.100.32.0007
Follow the direction of rotation of the mixing elements as indicated by the arrow attached
to the engine. An incorrect direction of rotations results in a loss of mixer performance.
ATTENTION
Check the mixer direction of rotation since a wrong direction could cause a detachment of
the pieces and later, its projection. This may cause personal damages and/or materials.
ATTENTION
Start-up
11
INOXPA S.A.U.
03.100.30.04EN · (0) 2021/05
