Inoksan BYM102B-HR, Руководство пользователя

Страница: 13 / 34

13

Take out and clean the pump front filter in
certain periods.

If the device will not be used for a long
time, the surfaces need to be covered with
Vaseline in thin layers.

Contact the authorized service in case a
dangerous situation is noticed in the
device. Do not let unqualified people to
interfere the device.

After a certain operating duration,
depending on the hardness of water, the
calcium and magnesium in the water can
cause the forming of boiler scale on the
interior surfaces of the wash tank, boilers
and interior sections of the water pumps
which can affect the devices performance.
For this reason, a boiler scale cleaning
process must be performed by a qualified
technician over time.

Maintenance of the boilers, emptying the
water inside the boiler and pump and
cleaning them must be performed by
qualified people periodically.

If there is a danger of freezing during the
times when the machine hasn't worked for
a long time, the wash pump and boiler
must be emptied.

Contact the authorized service in case a
dangerous situation is noticed in the
machine. Do not permit unqualified
people to interfere the device.
POTENTIAL PROBLEMS - CAUSES - SOLUTIONS
PROBLEM CAUSE SOLUTION
1 -Dishes are not clean. -Washing arms may be stuck.
-Washing water sprays may be
blocked.
-Rinsing water sprays may be
blocked.
-Detergent concentration may be
very high or insufficient.
-Filter may be blocked.
-Washing time may be insufficient.
-Check whether the dishes prevent arms from rotating.
-Clean the water sprays by removing the washing arm.
-Clean the water sprays by removing the rinsing arm.
-Check the hardness of water.
-Check the detergent amount.
-Remove and clean the filter.
-Select a longer wash period or repeat the same period.
2 -Dishes are getting broken. -Proper tray may not have been
used.
-Machine
may have been
overloaded.
-Be careful when selecting the tray.
-Comply with its capacity.
3 -The device does not take
water.
-Water inlet valve may be closed.
-Cover
may not be closed
completely.
-Solenoid valve may be broken.
-Check/Open
-Check/Close
-Notify the authorized service.
4 -The device continuously
takes water.
-Pressure stat may be defective.
-Pressure stat hose may have taken
in air. -Notify the authorized service.
-Empty the water inside the tank and restart the
device.
5 -There is rusting on the
device surface
-Improper chemical materials
may have been used. -Clean the device according to the instructions for use
DE
1. ERKLÄRUNG

Die Anweisungen dieser Anleitung
beinhalten wichtige İnformationen über
die zuverlässige Montage, Gebrauch,
Reinigung und Pflege des Gerätes.
Bewahren
sie deshalb diese
Gebrauchsanweisung an einem durch den
Verbraucher
und Techniker leicht
erreichbaren Ort auf.

Die Montage des Gerätes sollte durch
einen, vom Hersteller der Maschiene
beauftragten
und erfahrenen
Fachexperten, den Anweisungen der
Firma anpassend durchgeführt werden.

Die Wasser und Strom Verbindungen des
Gerätes sollten den Werten der Tabelle
der
“Technischen Eigenschaften”
anpassend gemacht werden.