Inoksan BYM052, Руководство пользователя

Страница: 11 / 49

11

5 Less dirty button
will flash red when selected

6 Dirty button
will flash red when selected

7 Very dirty button
will flash red when selected

8 Rinse led
Will flash red during rinsing

9 Boiler temperature
Red double digit

10 Drain button
Will flash red during manual or automatic
draining

ON

WATER INTAKE Fill water with the
Y1+M2 valve. Boiler and Tank is full when P1-
Pressure stat is seen
(6lt.)

HEATING First the Boiler is heated,
then the Tank is heated

READY START will be permitted
when Boiler and Tank reach the correct
temperature
Heaters are active during the waiting process
(Prm. Option : Permit START when not
ready)

START

WASHING M1 Washing engine active
(Heating active)

FILTERING ~5 sec wait
(Heating active)

RINSING Y1(Water intake) and M2
(Rinsing pump) active + PD (Polisher) output
active
( Heaters passive)

FILTERING ~5 sec wait
(Heating active)

FINISH START led flash
(Heating active for the next wash)

MANUAL DISCHARGE:
When the device is on or in standby mode, plastic
plug in the tank is removed and DISCHARGE
button is pressed during 2 seconds. Discharge
button blinks, which is a sign that the process has
started. When the process is over, the device shuts
off automatically (it goes into OFF mode.)
ON button (OFF when pressed for 2 sec.)
Red light sill appear in
stand-by condition, and green
light will appear when it is on
START <–> PAUSE (2 sn STOP) Green will be on when the
machine is working, and it will
be blinking if paused.
Tank Temperature Indicator The digit red temperature
indicator. It blinks at the right
bottom when heating is on.
Ready led Red will be on when the Boiler
and Tank temperatures are
ready
Lightly dirty Button Red light will appear when
chosen
Dirty Button Red light will appear when
chosen
Very Dirty Button Red light will appear when
chosen