CONFIDENTIAL and
PROPRIETARY
96-03996-00-01 revF
DCR-15-284
INOGEN ONE G3 OXYGEN CONCENTRATOR
TECHNICAL MANUAL
Page 12 of 17
inside the Inogen One G3 that provide additional filtration.
Maintenance of these filters is not required under normal
operating conditions.
3.2.3.
Surface Cleaning
The outside case should be cleaned using a cloth dampened with
a solution of mild detergent (e.g., dishwashing detergent, such
as Dawn
TM
) and water. Avoid getting water in or around the battery
connectors, power jack, or vents.
3.2.4.
Battery Care and Maintenance
The Inogen One G3 Lithium Ion Battery requires special care to
ensure proper performance and long life. Use only Inogen One G3
Batteries with the Inogen One G3 Oxygen Concentrator.
DESIGN
NOTE
The Inogen One G3 Oxygen Concentrator adjusts its oxygen
production rate to match the oxygen demand specified by
the user flow setting. When the device is used at lower
settings, its battery life is extended. Additionally,
at lower flow settings, the concentrator does not
generate as much heat and noise, draw as much electric
current from external power supplies, and many system
components do not wear as quickly.
Initial Battery State
The Inogen One G3 batteries are shipped 40% to 100% charged.
The battery can be used immediately; however, we recommend
the battery be charged upon receipt to ensure adequate run
time.
Normal Charging
The battery is operating properly when a battery icon is
displayed on the LCD screen.
The Inogen One G3 batteries do not have a “memory” like
older NiCad battery packs. The Inogen One G3 batteries can
be partially charged and discharged without damaging the
battery packs.
Effect of Temperature on Battery Performance
The Inogen One G3 battery powers the Inogen One G3 Oxygen
Concentrator from 2 to 4.5 hours using the standard 8 cell
pack (BA-300) under most environmental conditions. To
maintain maximum run-time of the battery, users should
avoid running in temperatures less than 40
o
F (4
o
C) or higher
than 95
o
F (35
o
C) for extended periods of time.