Innovative Concepts in Entertainment Ice Ball, Руководство владельца и по обслуживанию

Страница: 10 / 18

10
SET–UP / GAME TESTING
MODE 19
(THEME PLAY ON)
This mode allows the game’s theme song to be eliminated
during game play. Setting a “1” plays the theme during
game play. Setting a “0” turns the theme song off. It is
advisable to leave the song play during the game, as it
adds excitement to the game and speeds up game play.
NOTE: THE GAME’S THEME SONG IS
SYNCHRONIZED ON ALL GAMES. WHEN 1 GAME
IS STARTED, THE THEME PLAYS ON ALL GAMES.
THIS PREVENTS SONGS PLAYING AT DIFFERENT
TIMES AND THE DISTRACTING NOISES
ASSOCIATED WITH THAT CONDITION. THIS
SYNCHRONIZATION DOES NOT AFFECT GAME
PLAY IN ANY WAY AND IS A BENEFICIAL DESIGN
CONSIDERATION.
MODE 20
(STATION I.D.)
For the games to synchronize their sound properly or to
run the optional “Jackpot Marquee” properly, the games
must have different identification numbers. Each game
must be set to a different I.D. the numbers available are
from 00–13. It doesn’t matter which numbers you pick or if
the numbers are sequential or not, so long as each
number is different.
IMPORTANT: IF THE STATION I.D.’S ARE NOT SET
PROPERLY, THE GAME WILL WORK STRANGELY,
CAUSING MANY UNEXPECTED PROBLEMS.
MODE 21
(MODE)
This mode sets the score values for various point
configurations. The game comes with the following score
values:
1000
2000
3000
4000
5000
If you wish, you can set values in the 100’s range (100,
200, etc.) or in the 10’s range (10, 20, etc.). If you wish to
lower the value, use the following guide.
Set a “0” for point values in the 1,000’s
Set a “1” for point values in the 100’s
Set a “2” for point values in the 10’s
MODE 22
(NO KEEP HIGH SCORE)
This mode will reset the high score to the value set in
option mode 16 at power up when enabled. Setting a “0”
will keep the high score indicated at power down. Setting a
“1’ will reset the value to that in option mode 16.
MODE 23
(FACTORY DEFAULTS)
When this mode is selected, the game will revert to all
factory default settings.
SET “1”, THEN EXIT PROGRAMMING MODE TO
RESET ALL VALUES TO FACTORY DEFAULT.
The default for this mode is “0”.
TESTING
After the game is installed and set up, it is a good idea to
play a few games, to be sure everything is working
properly.
Play a few games paying special attention to the following
areas:
Balls per game
Tickets dispensed
Beacon light working
Proper scoring
Proper jackpot (If using Marquee)
IF YOU HAVE ANY QUESTIONS REGARDING
THESE SETTINGS, PLEASE CALL OUR